Most calibration settings are adjusted within Logger Pro. However, choosing Write Settings to Sensor on the Calibration Storage dialog causes the current calibration to be written on the sensor's own memory. You should only perform this action if you are absolutely sure that your current calibration needs to be available to all users of the sensor.
You can store multiple calibrations or overwrite existing calibrations on your sensor's chip. You are limited to three separate settings on a single sensor. You cannot overwrite Page 0, the sensor's factory settings.
Because you can store multiple calibrations settings onto your sensor's memory, you can also choose which of those settings acts as the default. Select the calibration from the Default drop-down menu.
Note: If you want to restore the sensor to its factory settings, click Set Sensor Factory Defaults in the Calibration Storage dialog.